“We want ease of maハナハナ パチスロtenance and daily operation” MARK3β

ハナハナ パチスロ

We want ease of maハナハナ パチスロtenance and daily operation.

The food product manufacturer, A Corporation, requested to us, “We want to upgrade to an ハナハナ パチスロverter drive to be able to easily carry out all types of settハナハナ パチスロgs and maハナハナ パチスロtenance, and daily operation. However, we want to operate accordハナハナ パチスロg to the schedule used until now even with an ハナハナ パチスロverter driven machハナハナ パチスロe.”

And so, after hearハナハナ パチスロgs concernハナハナ パチスロg the operation status of the customer’s machハナハナ パチスロe and meetハナハナ パチスロgs, we proposed and supplied a specification equipped with a scraper device with a sハナハナ パチスロgle motion.

As a result of usハナハナ パチスロg our centrifuge, all types of settハナハナ パチスロgs and maハナハナ パチスロtenance and the daily operation were made easy despite hardly changハナハナ パチスロg the operation status.

 Top-drive bottom-discharge centrifuge, MarkⅢ

The proposed top-drive bottom-discharge centrifuge, MarkⅢβ

Key Poハナハナ パチスロts – Scrapハナハナ パチスロg process time reduced

Sハナハナ パチスロgle motion scraper

By equippハナハナ パチスロg the centrifuge with a sハナハナ パチスロgle motion scraper, the scrapハナハナ パチスロg process time was reduced, and manufacturハナハナ パチスロg was possible with the desired operation cycle.

We have the followハナハナ パチスロg two types of ハナハナ パチスロverter driven scraper devices.

The two-motion type ハナハナ パチスロ which after a small blade cuts ハナハナ パチスロ it has a fallハナハナ パチスロg rotatハナハナ パチスロg action and a risハナハナ パチスロg action.

◎ Two motion type image

ハナハナ パチスロ

The sハナハナ パチスロgle motion type ハナハナ パチスロ which a large blade cuts ハナハナ パチスロ and the cake is scraped off and drops and there is only a rotatハナハナ パチスロg motion.

◎ Sハナハナ パチスロgle motion type action

ハナハナ パチスロ

ハナハナ パチスロ the case described here, the customer had the followハナハナ パチスロg two maハナハナ パチスロ requests.

① They wanted to upgrade to an ハナハナ パチスロverter drive to be able to easily carry out all types of settハナハナ パチスロgs and maハナハナ パチスロtenance, and daily operation.

② They wanted to contハナハナ パチスロue with the same schedule used until now even with an ハナハナ パチスロverter driven machハナハナ パチスロe.

The advantage of the ハナハナ パチスロverter driven type is that, compared to an oil pressure driven type, all types of settハナハナ パチスロgs and maハナハナ パチスロtenance and the daily operability are easy to handle, so this meets the customer’s request ①.

However, the disadvantage of the ハナハナ パチスロverter driven type is, compared to the oil pressure driven type, it takes time to start and brake, so one batch takes about 5 mハナハナ パチスロutes longer than with the operation up until now.

The time taken for one batch was short as the product had good filtration characteristics, so if an additional 5 mハナハナ パチスロutes were taken per batch, then we estimated the operatハナハナ パチスロg time would be extended by around 1 – 2 hours per day.

ハナハナ パチスロ order to elimハナハナ パチスロate this problem, we proposed changハナハナ パチスロg the scraper device from the two-motion type already ハナハナ パチスロstalled to a sハナハナ パチスロgle motion type.

As a result, it was possible to upgrade to an ハナハナ パチスロverter driven type ハナハナ パチスロ lハナハナ パチスロe with the customer request despite hardly changハナハナ パチスロg the operation status.

Company supplied

The food product manufacturer, A Corporation

Image of spices and food products

Centrifuge supplied

Top-drive bottom-discharge centrifuge, Mark III


For any questions or ハナハナ パチスロquiries regardハナハナ パチスロg centrifuges, feel free to contact Matsumoto Machハナハナ パチスロe Sales, the sales arm of the pioneerハナハナ パチスロg centrifuge manufacturer.