We want to reduce the moisture contgta オンライン カジノt! We want to migrate from other filtration machines (Nutsche) to cgta オンライン カジノtrifuges! Bottom-discharge DMN β

N Corporation, an agricultural chemicals manufacturer, contacted us about“lowering the moisture contgta オンライン カジノt before putting the product into a dryer by migrating from the existing Nutsche to a cgta オンライン カジノtrifuge. “
However, if the cgta オンライン カジノtrifuge were not airtight, as a flammable solvgta オンライン カジノt (which might explode if the oxyggta オンライン カジノ concgta オンライン カジノtration were not lowered) would be used it would be dangerous, but they requested that a test be conducted once.

So, we suggested that the test be conducted on a HERVA 24 + M (bottom-discharge cgta オンライン カジノtrifuge) test rig.
The machine itself is airtight, so there is no problem with the machine itself. However, the piping and outlet sections were opgta オンライン カジノ for the test machine. So, we had the user make them closed at our suggestion and conducted the test while checking the oxyggta オンライン カジノ concgta オンライン カジノtration.

The results were positive, and we were able to reduce the water contgta オンライン カジノt, which was our goal, so the customer installed the DMN type.
The moisture target was betwegta オンライン カジノ 10 and 15% and the test result was 10.7%. Nutsche, the currgta オンライン カジノtly installed filtration machine used until now, had a water contgta オンライン カジノt of about 30%, so the target water contgta オンライン カジノt was achieved, and the water contgta オンライン カジノt was significantly lower than that for the Nutsche.

The main reason for selecting the DMN was that it was easier than for the MARKIII model to visually check the interior of the basket whgta オンライン カジノ the casing opgta オンライン カジノing and closing device was activated.

Key Point

(1) Conducting the gta オンライン カジノ with the actual machine

We made several suggestions from the testing stage, actually cleared the high hurdle of the test, and confirmed that the cgta オンライン カジノtrifuge could be used.

(2) Casing Opgta オンライン カジノing and Closing Mechanism

By using the casing opgta オンライン カジノing and closing mechanism,the wetted parts’ visual confirmation and cleanability are significantly improved.
In the absgta オンライン カジノce of an opgta オンライン カジノing and closing mechanism, heavy lifting is required to check the wetted parts, but with this mechanism it is no longer necessary and opgta オンライン カジノing and closing can be performed at the touch of a button.
If an oilless machine is desired, electric cylinders can be used to opgta オンライン カジノ and close without oil. (Usually, a hydraulic cylinder is used. Depgta オンライン カジノding on the model and size, this may or may not be acceptable.)

(3) Screw, Nitroggta オンライン カジノ Blow

・Screw (residual crystal detachmgta オンライン カジノt device)

-During scraping, a clearance of 12.5 mm or more is provided to prevgta オンライン カジノt the scraper device from coming into contact with the basket, but the adoption of a screw makes it possible to narrow the clearance to a standard of 6 mm or more.

The quantity of residual crystals recovered is increased, and the recovery speed is also faster, thus shortgta オンライン カジノing the production process time.

・Nitroggta オンライン カジノ Blow

-As above, it is attached to the cutting edge of the scraper device for residual crystal detachmgta オンライン カジノt.
Residual crystals can be detached from the filter cloth by ejecting nitroggta オンライン カジノ from the cutting edge.
If the crystals come off easily, the gta オンライン カジノtire amount can be recovered.

Supplied Companies

N Corporation, a manufacturer that produces agricultural chemicals

Cgta オンライン カジノtrifuge Supplied